Sale!
fluid alarm wireless systemfluid alarm wireless system

1 x Fluid Alarm Wireless System [FAWS]

$279.00 $199.00

Why pay RR$279.00

Note: This price includes installation when purchased with a new BLACKBOX system

FLUID ALARM WIRELESS SYSTEM [FAWS]
The Fluid Alarm Wireless System [FAWS] for our range of BLACKBOX pump systems gives peace of mind, knowing that your waste water system is being monitored quietly in the background for you.

FLUID ALARM WIRELESS SYSTEM [FAWS] – Features
The Storeit4less ‘FAWS’ incorporates the following user friendly features
[1] 1 x Wireless sender Unit (includes 12v battery)
[2] 1 x Wireless Receiver Alarm Unit (includes rechargeable battery, recharge cable with NZ plug)
[3] 1 x Programmable Remote Control Unit
[4] 1 x Auto Probe Sensor Unit (for the BLACKBOX-62)
[5] 1 x Magnetic Float Unit (for the BLACKBOX-85 & BLACKBOX-270)

FLUID ALARM WIRELESS SYSTEM [FAWS] – Installation Options
Installation Options:
[1] Purchase a BLACKBOX with a ‘FAWS’ factory installed, or
[2] Retrofit a ‘FAWS’ to an existing BLACKBOX-62.

Please contact Storeit4less for any installation tips or step-by-step advice, on (021) 355 005

ONLY THE BEST FROM STOREIT4LESS

2 in stock (can be backordered)

Category:

Description

FLUID ALARM WIRELESS SYSTEM [FAWS]

The Fluid Alarm Wireless System [FAWS] for our range of BLACKBOX pump systems gives peace of mind, knowing that your waste water system is being monitored quietly in the background for you.

FLUID ALARM WIRELESS SYSTEM [FAWS] – Features

The Storeit4less ‘FAWS’ incorporates the following user friendly features
[1] 1 x Wireless sender Unit (includes 12v battery)
[2] 1 x Wireless Receiver Alarm Unit (includes rechargeable battery, recharge cable with NZ plug)
[3] 1 x Programmable Remote Control Unit
[4] 1 x Auto Probe Sensor Unit (for the BLACKBOX-62)
[5] 1 x Magnetic Float Unit (for the BLACKBOX-85 & BLACKBOX-270)

FLUID ALARM WIRELESS SYSTEM [FAWS] – Installation Options

Installation Options:
[1] Purchase a BLACKBOX with a ‘FAWS’ factory installed, or
[2] Retrofit a ‘FAWS’ to an existing BLACKBOX-62

Example on how to retrofit the FAWS’ system to a BLACKBOX62 (the process differs slightly for a BB85 and BB270 system:

  • Undo the four screws in the lid of the grey ‘FAWS’ Probe Sensor Unit outer box and remove the lid
  • Remove the two Stainless Steel Probes from the base of the grey waterproof probe outer box (remember the order of the nut and washers)
  • Place the FAWS Probe Sensor Unit outer box on top of the BLACKBOX-62 tank
  • Drill two holes (3.5mm drill) into the top of the tank (through the probe sensor holes)
  • Install the two Probes back through the holes in the grey waterproof probe outer box, and screw probes carefully into the holes drilled into the tank
  • Secure the probes inside the tank with the supplied washer and nut
  • Check that the battery in the white wireless sender unit is correctly installed
  • Replace the lid on the ‘FAWS’ Probe Sensor Unit outer box
  • Turn on the ‘FAWS’ Receiver Unit
  • Press the ‘closed lock’ button on the remote control (this arms the system)
  • Intentionally ‘overfill’ the BLACKBOX to test the ‘FAWS’ Probes (the Receiver Siren should activate when the water level is within 10mm from the top of the tank and comes into contact with both of the Probes
  • When the ‘FAWS’ Receiver Siren activates, click the ‘open lock’ button on the remote control (this disarms the system) Please contact Storeit4less for any installation tips or step-by-step advice, on (021) 355 005

You can purchase online this product

  • direct from the storeit4less online store, or
  • on trademe [type ‘storeit4less’ in all categories into the main search bar and click the ‘search’ button], or
  • on 4tradeit [type ‘storeit4less’ all categories into the main search bar and click the ‘Go’ button]

Reviews

There are no reviews yet.

Be the first to review “1 x Fluid Alarm Wireless System [FAWS]”

Your email address will not be published. Required fields are marked *

Name
Email
Phone
Enquiry